Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Foundry Torch
Gas Foundry Torches
Mono 20
$425
- Input Potential 200,000 BTU/Hr.
- Minimum 15 PSIG Fuel Pressure
- 2000 Degree (F) Flame
Mono 30
$435
- Input Potential 350,000 BTU/Hr.
- Minimum 15 PSIG Fuel Pressure
- 2000 Degree (F) Flame
Mono 35
$445
- Input Potential 500,000 BTU/Hr.
- Minimum 15 PSIG Fuel Pressure
- 2000 Degree (F) Flame
Mono 40
$455
- Input Potential 750,000 BTU/Hr.
- Minimum 15 PSIG Fuel Pressure
- 2000 Degree (F) Flame
Gas & Compressed Air Foundry Torches
Model C
$585
- Input Potential 1,000,000 BTU/Hr.
- 5-25 PSIG Fuel Pressure
- 50-150 PSIG Compressed Air Pressure
- 2150 Degree (F) Flame
Model D
$590
- Input Potential 1,500,000 BTU/Hr.
- 1-15 PSIG Fuel Pressure
- 50-150 PSIG Compressed Air Pressure
- 2150 Degree (F) Flame
Model E
$675
- Input Potential 1,500,000 BTU/Hr.
- 1-15 PSIG Fuel Pressure
- 50-150 PSIG Compressed Air Pressure
- 2150 Degree (F) Flame
BELCHFIRE Torches are used by Welding Fabricators, Foundries, Cast Iron, and Marine Service Shops where Pre Heating and Post Heating are Required for Ladle Heating, Crucible Heating, Preheating Metal, Welding Cast Iron, Nickel Welding, and Cast Iron Crack Repair.
Quick Info: cast iron crack repair, cast iron preheating torch, post-heating torch, tube burner, cast iron repair, crucible heating, crucible preheating, crucible postheating, foundry heating torch, foundry torch, foundry torches, preheating torches, heating torches, postheating torches, fuel only torches, fuel only torch, gas only torches, gas only torch, high combustion torch, high combustion torches, natural gas torch, natural gas torches, high temperature torch, ladle heating, preheating metal,nickel welding
- Input Potential: 500,000 BTU per Hour
- Fuel Pressure: Minimum 15 PSIG
- Flame Temperature: 2,000 Degrees Fahrenheit
- Combustion Chamber Diameter: 3.5 Inches
- Length: 28 Inches
- Weight: 4 Lbs
- Fuel Connection: 1/2 Inch NPT
Propane, Propylene, MAPP (Vapor Only)
| Fuel Consumption – BTU Input |
500,000
|
| Fuel Consumption – CFH Input |
200
|
Natural Gas
| Fuel Consumption – BTU Input |
325,000
|
| Fuel Consumption – CFH Input |
300
|
No Compressed Air Required | Lightweight | Rugged | Simple to Operate
This portable heating torch with high BTU output potential employs a preheating loop for warming and expanding the gas for more combustion efficiency. These torches are not as efficient as the gaseous plus air torches and an orifice change must be made when changing fuels. Minimum gas pressure of 15 psi must be maintained for proper gas to air ratio.
These portable heating torches are lightweight, rugged and flexible in their use. The combustion chamber is a heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the mixing chamber, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air aiding combustion and reducing noise level.
* Optional 90 Degree Feature Available
** Specify Gas Type When Ordering
Parts for Mono 20, 30, 35 & 40
Download PDF Brochure
Download PDF Brochure
- Input Potential: 300,000 BTU per Hour
- Fuel Pressure: Minimum 15 PSIG
- Flame Temperature: 2,000 Degrees Fahrenheit
- Combustion Chamber Diameter: 3 Inches
- Length: 23 Inches
- Weight: 3 Lbs
- Fuel Connection: 1/2 Inch NPT
Propane, Propylene, MAPP (Vapor Only)
| Fuel Consumption – BTU Input |
300,000
|
| Fuel Consumption – CFH Input |
120
|
Natural Gas
| Fuel Consumption – BTU Input |
200,000
|
| Fuel Consumption – CFH Input |
190
|
No Compressed Air Required | Lightweight | Rugged | Simple to Operate
This portable heating torch with high BTU output potential employs a preheating loop for warming and expanding the gas for more combustion efficiency. These torches are not as efficient as the gaseous plus air torches and an orifice change must be made when changing fuels. Minimum gas pressure of 15 psi must be maintained for proper gas to air ratio.
These portable heating torches are lightweight, rugged and flexible in their use. The combustion chamber is a heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the mixing chamber, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air aiding combustion and reducing noise level.
* Optional 90 Degree Feature Available
** Specify Gas Type When Ordering
Parts for Mono 20, 30, 35 & 40
Download PDF Brochure
Download PDF Brochure
- Input Potential: 200,000 BTU per Hour
- Fuel Pressure: Minimum 15 PSIG
- Flame Temperature: 2,000 Degrees Fahrenheit
- Combustion Chamber Diameter: 2 Inches
- Length: 23 Inches
- Weight: 3 Lbs
- Fuel Connection: 1/2 Inch NPT
Propane, Propylene, MAPP (Vapor Only)
| Fuel Consumption – BTU Input |
200,000
|
| Fuel Consumption – CFH Input |
80
|
Natural Gas
| Fuel Consumption – BTU Input |
130,000
|
| Fuel Consumption – CFH Input |
120
|
No Compressed Air Required | Lightweight | Rugged | Simple to Operate
This portable heating torch with high BTU output potential employs a preheating loop for warming and expanding the gas for more combustion efficiency. These torches are not as efficient as the gaseous plus air torches and an orifice change must be made when changing fuels. Minimum gas pressure of 15 psi must be maintained for proper gas to air ratio.
These portable heating torches are lightweight, rugged and flexible in their use. The combustion chamber is a heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the mixing chamber, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air aiding combustion and reducing noise level.
* Optional 90 Degree Feature Available
** Specify Gas Type When Ordering
Parts for Mono 20, 30, 35 & 40
Download PDF Brochure
Download PDF Brochure
