Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Related: Natural Gas, Natural Gas Torch, Natural Gas Pre Heating Torch, Natural Gas Post Heating Torch
Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Torches operate on Natural Gas, Mapp Gas, HPG, LP, Propylene & Propane Gas
Do Not Use Acetylene or Oxygen.
The torch can be modified to whatever length is required for your application. The combustion chamber can be rotated to direct the flame to a comfortable working angle. Torch is supplied with a 180° head. To change angle, add any angled pipe fitting.
Features: Low Cost Operation | High Efficiency Flame | Completely Adjustable Flame | Low Maintenance Simple to Operate
BELCHFIRE © gaseous fuel plus air torches burn all commercial LP type fuels or natural gas combined with 50 – 150 psi compressed air.
No orifice changes or modification are required when changing from one gas to another. They are instant lighting and have a completely adjustable flame.
Backfire is impossible because air and gas are mixed externally. The combustion chamber is phenomenal because it is of thin and light, heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the air – fuel mixture, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air (6 volumes of sec. air to 1) aiding combustion and reducing noise level. May require manifolding of LP fuel bottles or larger fuel source.
| Fuel Consumption – BTU Input |
1,000,000 |
| Fuel Consumption – CFH Input |
400 |
Natural Gas
|
| Fuel Consumption – BTU Input |
1,500,000
|
| Fuel Consumption – CFH Input |
600
|
| Fuel Consumption – BTU Input |
1,000,000
|
| Fuel Consumption – CFH Input |
950
|
| Fuel Consumption – BTU Input |
2,000,000
|
| Fuel Consumption – CFH Input |
800
|
| Fuel Consumption – BTU Input |
1,400,000
|
| Fuel Consumption – CFH Input |
1,300
|
Belchfire Torches Operate on Natural Gas, Mapp Gas, HPG, LP, Propylene & Propane Gas.
Do Not Use Acetylene or Oxygen
Features:
No Compressed Air Required | Lightweight | Rugged | Simple to Operate
This portable heating torch with high BTU output potential employs a preheating loop for warming and expanding the gas for more combustion efficiency. These torches are not as efficient as the gaseous plus air torches and an orifice change must be made when changing fuels. Minimum gas pressure of 15 psi must be maintained for proper gas to air ratio.
These portable heating torches are lightweight, rugged and flexible in their use. The combustion chamber is a heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the mixing chamber, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air aiding combustion and reducing noise level.
* Optional 90 Degree Feature Available
** Specify Gas Type When Ordering
| Fuel Consumption – BTU Input |
200,000
|
| Fuel Consumption – CFH Input |
80
|
| Fuel Consumption – BTU Input |
130,000
|
| Fuel Consumption – CFH Input |
120
|
| Fuel Consumption – BTU Input |
500,000
|
| Fuel Consumption – CFH Input |
200
|
| Fuel Consumption – BTU Input |
325,000
|
| Fuel Consumption – CFH Input |
300
|
| Fuel Consumption – BTU Input |
300,000
|
| Fuel Consumption – CFH Input |
120
|
| Fuel Consumption – BTU Input |
200,000
|
| Fuel Consumption – CFH Input |
190
|
| Fuel Consumption – BTU Input |
750,000
|
| Fuel Consumption – CFH Input |
300
|
| Fuel Consumption – BTU Input |
525,000
|
| Fuel Consumption – CFH Input |
475
|
Valve is available for Belchfire fuel only Mono torches. This valve is used when a pilot flame is required on the torch. When in use, the operator does not have to light the torch every time a heating flame is required. Manual operation of the valve is required by the operator.
© 2019 · Belchfire Corporation.
