Belchfire Torch Products

A BELCHFIRE © Torch is used by welding fabricators, cast iron and marine repair service shops where welding codes and alloy content prescribe higher temperatures for welding. A BELCHFIRE © Torch is used by foundries to preheat and maintain interpass temperatures, post-heat in casting repairs and reduce moisture content; plus, prevent thermal shock in molds and ladle liner materials. The selection table below outlines differences in the different models of BELCHFIRE © Torches. Detailed specifications of each model can be found by clicking on that model TORCH SELECTION When selecting a torch, consider the following factors: 1) Type of fuel to be used 2) Fuel pressure available 3) Availability of compressed air 4) Size and type of work to be heated 5) Desired work temperature A BELCHFIRE © Torch is easily ignitable, operate more efficiently, and give infinitely controllable heat at less cost with greater safety. A BELCHFIRE © Torch is lightweight, rugged, and can be used in a fixture or held by hand. BELCHFIRE © torches require low maintenance and are economically priced. Contact us by phone for any further assistance you may require. (262) 783 - 1500   BELCHFIRE TORCH MODEL Input Potential BTU / HR Fuel Pressure PSIG Compressed Air PSIG Flame Temp. ºF FUEL ONLY MONO 20 MONO 30 MONO 35 MONO 40 200,000 350,000 500,000 750,000 min. 15 min. 15 min. 15 min. 15 none none none none 2000 2000 2000 2000 FUEL & AIR MODEL C MODEL D MODEL E Tube Burner 1,000,000 1,500,000 2,000,000 1,000,000 1 - 10 1 - 15 5 - 25 1 - 15  50 - 150 50 - 150 50 - 150 50 - 150 2150 2150 2150 2100