CRUCIBLE HEATING TORCH
Album: Applications
Album: Applications
Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
Heating Your Crucible requires gradual and controlled heating before full melting heat is applied. Proper heating will prevent damage from thermal shock. Some crucible materials are more sensitive to rapid temperature changes than others, so different crucible types require different heating cycles. Know and follow the heating guidelines provided by your crucible manufacturer.
Can be used with most current fuel gases including LP gases, propylene, natural gas and MAPP gas.
BELCHFIRE Torches are used by Welding Fabricators, Foundries, Cast Iron, and Marine Service Shops where Pre Heating and Post Heating are Required for Ladle Heating, Crucible Heating, Preheating Metal, Welding Cast Iron, Nickel Welding, and Cast Iron Crack Repair.
Quick Info: cast iron crack repair, cast iron preheating torch, post-heating torch, tube burner, cast iron repair, crucible heating, crucible preheating, crucible postheating, foundry heating torch, foundry torch, foundry torches, preheating torches, heating torches, postheating ladle torches, fuel only torches, fuel only torch, gas only torches, gas only torch, high combustion torch, high combustion torches, natural gas torch, natural gas torches, high temperature torch, ladle heating, preheating metal,nickel welding
Torches operate on Natural Gas, Mapp Gas, HPG, LP, Propylene & Propane Gas
Do Not Use Acetylene or Oxygen.
The torch can be modified to whatever length is required for your application. The combustion chamber can be rotated to direct the flame to a comfortable working angle. Torch is supplied with a 180° head. To change angle, add any angled pipe fitting.
Features: Low Cost Operation | High Efficiency Flame | Completely Adjustable Flame | Low Maintenance Simple to Operate
BELCHFIRE © gaseous fuel plus air torches burn all commercial LP type fuels or natural gas combined with 50 – 150 psi compressed air.
No orifice changes or modification are required when changing from one gas to another. They are instant lighting and have a completely adjustable flame.
Backfire is impossible because air and gas are mixed externally. The combustion chamber is phenomenal because it is of thin and light, heat resisting material which glows at a bright red. This bright red glow is radiant heat which reflects back into the air – fuel mixture, thus enhancing the combustion process. Also, the many louvered openings permit a parallel flow of secondary air (6 volumes of sec. air to 1) aiding combustion and reducing noise level. May require manifolding of LP fuel bottles or larger fuel source.
Fuel Consumption – BTU Input |
1,000,000 |
Fuel Consumption – CFH Input |
400 |
Natural Gas
|
Fuel Consumption – BTU Input |
1,500,000
|
Fuel Consumption – CFH Input |
600
|
Fuel Consumption – BTU Input |
1,000,000
|
Fuel Consumption – CFH Input |
950
|
Fuel Consumption – BTU Input |
2,000,000
|
Fuel Consumption – CFH Input |
800
|
Fuel Consumption – BTU Input |
1,400,000
|
Fuel Consumption – CFH Input |
1,300
|
High Temperature Natural Gas Torches
Belchfire Corporation 4916 North 125th Street Butler, WI 53007
Phone: 262-783-1500 Fax: 800-387-4491 sales@belchfire.com
BELCHFIRE High temperature natural gas torches are used by welding fabricators, iron foundries, cast iron repair shops, heavy equipment manufacturers and marine service shops where high temperature preheating and post heating of metals are required. Used for foundry ladle heating, foundry crucibles, preheating metal for fabrication, heating for welding cast iron, heating for welding nickel, and heating for cast iron crack repair using natural gas sources.
© 2024 · Belchfire Corporation.